Reset Printer Model Canon

The reset procedure counter printer Canon MP170 does not vary much with regard to models Canon MP in case of you need reset printer canon mp170, then te presento solution in two different situations, a more simple than the other but equally effective to continue normally using our printer canon mp170.Method 1 to reset Canon MP170 printer: in case that shows you the message that the cartridges are empty. You must first send a print, and a message cartridges are empty now you must hold down for 10 seconds the button of SUMMARIZES / CANCEL restart / cancel starts cleaning, after this cycle be printed normally, this error message is usually displayed after installing a new cartridge ink, or in the case that we had refilled these cartridges. Method 2 to reset Canon MP170 printer: If you have full ink counter this procedure you should do it if not function above, that as problems can occur when you print change ink cartridge. Turns off the printer press the ON/OFF button while you press the button STOP/RESET stop / reset (contains a circle with a triangle inverse) without releasing the ON/OFF button when the led changes to green, you must release the STOP/RESET button and press it twice released both buttons, the printer is in SERVICE MODE service mode when the ON/OFF led changes to green, press the button STOP/RESET 4 times turns off the printer by pressing twice ON/OFF turn on the printer again ON/OFF, the lights remain flashing orange. Enter to reload there you will find other mini tutorials, how to reset printer original author and source of the article.